LED bay light has its own characteristics suitable for factories and enterprises, workshop, factory, warehouse, highway toll stations, gas stations, supermarkets, exhibition halls, and other high-rise buildings or outside the workplace. Widely used LED high bay lamp how to install it? In this paper, Kang still a LED high bay lights, for example, as we install LED high bay lamp to the next.
ENELTEC LED high bay lamp in the box is divided into three parts, the lamp body, shade, as well as accessories (Screws, lens, fixed hanging ring).
1, Take out the product, check all items.
2, the lens is fixed to the lamp body, pay attention to the alignment holes, place the correct position inside the COB light source should be in the middle position of the lens to tighten the screws.
3, the lamp shade fixed on the body, in order to facilitate operation of the lamp body can be upside down on the table, then pick up the holes aligned with the lamp shade on the place up. Then tighten the screws.
4, hanging ring fixed to the lamp body, fixed hook is threaded directly screwed on the lamp body.
5, the assembly step is completed, the LED will take over high bay lamp hanging ring aligned reserved good hook.
6, the remaining wiring work LED high bay lights, pay attention to distinguish between the zero line and the line of fire in order to ensure safety, be installed by a professional electrician.
All above is the installation procedure of LED high bay lamp, remember to power up after the installation.
