On January 22, 2015, published by the state quality supervision, inspection and quarantine toys 34 kinds of national product quality supervision and spot check result.The selectived examination in shanxi, Shanghai, jiangsu, zhejiang, anhui, fujian, jiangxi, shandong, hubei, guangdong, and other 10 provinces, municipalities directly under the central government, 73 companies since 73 batches of ballast LED lights products, including the orientation from the ballast LED lights and reflective since ballast LED lights two products, unqualified detection rate of 28.8%.
The spot check according to GB 24906-24906 "ordinary lighting from ballast LED lights safety requirements" over 50 v, GB/T20145-2006 the biological safety of light the lamp and lamp system ", GB/T24908-2010 "since the ordinary lighting ballast LED lamp performance requirements", GB/T29296-2012 "reflective since the ballast LED lamp performance requirements", GB 30255-2013 over the ordinary lighting from ballast LED lamp limited value of energy efficiency and energy efficiency grade, GB 17625.1 2012 the emc limit harmonic current emission limit value (equipment 16 or less input current in each phase a) ", GB 17743-2007, the radio disturbance characteristics of electrical lighting and similar equipment limits and measurement method of standard requirements, such as logo, interchangeability of the ballast LED lights products, protection of accidental contact with live parts, wet processing after the insulation resistance and dielectric strength, mechanical strength, heat resistance, fireproof and flameproof terminal, harmonic current limits, power voltage and radiated electromagnetic disturbance, lamp power, power factor, initial photosynthetic efficiency/luminous flux, color features, the allowable value of energy efficiency, light biological hazards, the appearance of lamp, luminous flux, initial size photosynthetic efficiency, beam Angle, center 22 projects, such as light intensity, color parameters of the inspection.
Spot checks found 21 batches product does not comply with the provisions of the standard, involving logo, interchangeability, wet processing after the insulation resistance and dielectric strength, mechanical strength, allowable value of energy efficiency, power terminal electromagnetic disturbance voltage, radiation harassment, accidental contact with live parts of protection, power factor, color characteristics of the project.
