LED bulb due to high consumer acceptance and can replace strong, is the current market demand for the highest replacement LED light source type. With a 9W of LED bulb for example, the brightness equivalent to 60 watt incandescent, compared to incandescent lamps can save 80 percent, saving more than 50% energy saving lamp life of 15,000 hours. Guangzhou 0.6 yuan a kilowatt calculated on the basis of one year of the initial purchase cost plus a year of electricity but also lower than incandescent and electronic energy-saving lamps.
1, the convenience
LED bulb can directly replace existing Similarly E27, E14, GU10 lamps and energy-saving light bulbs B22 interface and general product, do not make any changes, without the aid of any technician or professional, read our instructions, DIY you can easily replace the general lighting becomes LED lighting.
2, safety
Ordinary energy-saving lamps operating temperature will be around 60-80 ℃, ordinary incandescent temperature higher (80-120 ℃), a little careless encounter that will burn.
LED bulb using LED as the light source, together with professional cooling structure, when the operating temperature is very low (40-60 ℃), even in their hands will not burn.
Material use energy-saving lamps and ordinary light bulbs products is glass, with a hard object collision is easily broken, causing permanent damage and can not be used, but are not careful it will be cut glass.
Bulb using a professionally designed shell, lamp shell material used is PC material / acrylic die casting, LED light source used is part of the seismic ruggedness of special material (the lens portion is used in the most advanced molding soft lens technology), and its shade is acrylic materials, even if broken is not easy cause cuts.
3, energy saving
Ordinary light bulb power ranging from 20W-100W, while energy-saving lamp power 5W-65W range. Use LED bulbs as light source, power just 0.8W-12W to replace 15W-100W ordinary bulb and 5W-50W energy-saving lamps. Visible LED bulb with ordinary light bulbs and energy-saving lamp power ratio can reach 1:10.
Ordinary light bulbs and energy-saving lamps work when using very high temperatures (80-120 ℃), and contains IR (infrared), higher levels of general energy-saving lamp bulb glowing spectrum, the extensive use of ambient temperature may rise significantly, if it is in the summer significantly increased the workload and time of refrigeration equipment, the end result is the increase in power consumption.
