How to analyze the High level and Low level LED bulbs

  Currently on the market , LED products of varying quality , the price is very confusing, even for the same product , the level of the price difference between King ran up to 10 times. 5 -watt bulb for example , expensive to hundreds of dollars , as long as a few dollars cheaper , the price difference is so great that consumers are kept, even no choice.

How to analyze the High level and Low level LED bulbs

  The following will give you a detailed analysis of these two products. Where high-end products for ENELTEC of 5WLED bulb, hereinafter referred to as "ENELTEC", the low-end products for a certain brand of Zhongshan , priced at $ 6, hereinafter referred to as " a certain brand ."

  The appearance, product design aesthetics ENELTEC , feel heavy, metal shell , with good heat dissipation, ensuring long life of the LED. The appearance of a certain brand of rough , feel very light , plastic shell , no heat capacity , can not guarantee a long life of the LED.

  Turn on the lights , ENELTEC light bulb would have a better quality , it feels very comfortable light , and no flicker . A certain brand of light bulb impure , mainly CRI is not high , and there is a serious flicker, likely to cause eye fatigue.

  Open shade look , ENELTEC using glass shade , soft light, not easy to aging , LED COB ceramic devices , light is better, the entire COB placed on a metal heat sink , the assembly process is extremely fine .

  A brand is using ordinary 2835 lamp beads ( of course not to say that 2835 is not good here , but its use is low in 2835 , bad glow ) , glow general , PCB board as a normal FR4 board, poor thermal performance and no metal heat sink , no heat capacity , PCB enclosure by four small card bit stuck , assembly process in general.

  ENELTEC bulb switch power supply is isolated constant current source , a capacitor for avoiding thermal design to improve the power of life , while inside a plastic body for electrical isolation , with high security.

  Using a certain brand of low-end power RC Buck , poor performance , poor stability , short life .

  Different brands of LED lights visible , either in quality or price difference is relatively large , and from the perspective of quality and safety , we recommend that consumers buy a certain well-known brands of plant products, the quality is guaranteed .

About ENELTEC

ENELTEC care so much about the brand enfluences and also the satisfactory experience of our customers. So we always put alot of efforts on the products quality and after sales service. We emphasis on applying for the necessary certificates for our target market , controlling every step of the productions , testing before delivery and tracking each order after delivery.
LED Lights
LED Lights
ENELTEC LED Lights

LED Project Pictures