In order to actively respond to the national energy conservation and green development needs and the safe use of lamps, it also complies with the relevant financial management regulations of the China Science and Technology Museum. It is planned to replace the metal halide downlights with LED lamps in the public corridors of the China Science and Technology Museum exhibition halls, the front desks of the exhibition halls, above the escalators, and above the entrances of the theaters. In order to scientifically standardize the preliminary budget, we are now conducting market price research for this project. The specific requirements are as follows:
1. Project requirements
1. Purchase and replace 1242 sets of LED lamps, daylight type.
2. Reference brands: Philips 24W, Op 22W, NVC 18W
3. The LED lamps must meet the embedded installation, the original opening diameter is 200MM. The installation is firm without gaps and looseness.
4. The wiring of LED lamps should be connected with push-type quick terminal blocks (two in and two out) and covered with insulating tape.
5. The rental fee of the lift truck shall be borne by the undertaker.
6. Remove the original metal halide downlights at 1242 and replace the LED lamps. The original lamps are stored in the designated library area.
