UL Listed LED High Bay Lights High Lumens
UL Listed LED High Bay Lights use Bridgelux and CREE LED, MEANWELL drivers. Power range is from 50-180W, three beam angle caps 45°/90°/120°for selection, 3 yeears warranty, which could replace 150W-600W Metal Halide Lamps.
UL Listed LED High Bay Lights High Lumens Specification:
Power Factor: >0.97
Operating temperature: -25 to + 45°C
Light Degradation: < 5% in 20,000 hours
Warranty: 3 years
1. Install reflector on the heat sink, wrest fixed screws very tightly2. Wrest hanger into top cap, wrest lock screw very tightly3. Hang the lamp on the installation site,and screw down the non skid lock.
4. Hang chaining of steel wire on another installation device.
5. Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.
1.Only professional electrician can install the lamp, please check the lamp verycarefully before installation2.Please install the lamp follow up the installation procedure, make sure the screwhas been wrested very tightly, the wires have been connected properly.Pleaseoperate according to Product Instructions enclosed.